Item # 5564 – WAFER CONE OVEN
Manufactured by HAAS
Model MTRO-36 Wafer Cone Oven, for large cones,
Gas fired,
36-plate,
with electronic heat control.
Cone is approx. 180-200mms long x 90-100mms wide, the angle is approx. 26 degrees.
Wafer plate size is 220 x 220mms,
cooling table is about 4 metres long.
Also with a HAAS 120 litres Mixer |  |
Item # 5413 - HOLLOW WAFER OVEN
Manufactured by HAAS
Model SWA12
for production for hollow wafer.
gas
360 sheets per hour
This oven was used to make sheets of wafers with raised sections,
when formed into a book and centre filled & coated the product is in a style similar to a "kinder bueno". Or you can make individual square pieces from the same sheet.
very good condition, only 1000 working hours | 
|
Item # 5412 - TWISTED WAFER ROLL OVEN
Manufactured by GROSSMANN
Fully automatic machine for producing wafer rolls of varying lengths
Model SW-H and model SW-R
electric
18 plate oven
with wafer rolling & cutting unit
with filling machine
almost never worked , only 500 hours | 
|
Item # 5228 – ROLLED WAFER CONE OVEN Manufactured by STEINHOFF Model PRO 3076 For flat top cones with paper outer. After fully automatic baking of sugar wafer sheets with or without border collar, the wafer sheets are rolled to cones in the rolling station and fed via a multi-track conveyor table to the counting and stacking table with separate track controls. The rolling tools in the rolling station are exchangeable and allow the production of cones with various angles, diameters and lengths.year of construction 2003 Number of baking plates 76 cone length 120 Max. cones/h 10 000 Gas (natural) or Propane/butane Click for video | 
|
Item # 5171 – ROLLED WAFER CONE OVEN
Manufactured by WALTERWERK
Model Jupiter 37/2
(Double oven space available it is suitable for the manufacture of small wafer cones and mini cones, with 60-130 mm in length)
Capacity up to 4500 pieces per hour. |  |
Item # 5160 - Automatic Rolled Wafer Sugar Cone Plant,
manufactured by WALTERWERK (Germany)
Model Jupiter JU-69 Plant,
Gas Fired, 5.5Kw.
There are currently available three (3) different sizes of natural top waffle cone to make on this machine,
as well as the cup press unit ( to make natural top waffle bowls), which can be attached to the oven when you take the rolling tool unit out. click for video |  |
Item # 5087 - ROLLED WAFER STICK OVEN
Automatic baking machine for hollow or filled wafer sticks with facility for 2 colour sticks and pressed belt for flat finish.
Manufactured by HAAS
Model EWB 2/1 IE
With electrical infrared heating
all Stainless Steel
only 1569 hours of production time
including
- Batter tank and pump.
- Filling device (F-EWB) complete with pump and tank with agitator for fat creams or chocolate.
- Wafer Stick Pressing Belt (HHPB).
- Double Deposit (DA-EWB) incl. 2nd batter tank, for two-coloured wafer sticks.
Diameter of baking drum 2m
1-rolling tool
Up to 4,000 pieces per hour (based on 9mm diameter x 100mm)
90kw connected load: 75kw/hr consumption |  |
4932 - ROLLED WAFER CONE OVEN
Manufactured by STEINHOFF
Model PRO/1-01
Capacity up to 7500 pieces per hour
Gas heated.
complete with wrapping tools, cooling table, counting and stacking table, dough container | 
|
Item # 4280 - WAFER LINE
Manufactured by HAAS
including:
HAAS Wafer oven model WA 18EL
18 plates.
with batter feed tank and pump
with Wafer cooling unit
with Wafer cream spreader
with Wafer 2-axis wire cutter |  |
