extruders

4658 - EXTRUDER Manufactured by BAKER PERKINS Model MPF-65:15 Twin Screw Cooker Extruder, rated at up to 200Kgs per hour depending on product, Barrel diameter 65mm. 40kw drive (55hp) 500rev/minute length: diameter ratio 15:1 6 temperature control zones being used on rice crispies & choco pops, all complete and in good working order, 65mms barrel diameter
4645 - LICORICE EXTRUSION LINE, set up to produce extruded fruit sticks. (offered without the mixing tanks & cookers) Line consists of : HOBART 4346 Mixer/Grinder, (2) BCH Extruders: Output for 12mm diameter ropes should be around 400 to 500kg/hr each. If both extruders are used on the line it would produce a centre filled product. KNOBEL Cooling Tunnel. 550mm wide. 8m of cooling, with 1m infeed, 1m outfeed. YANAGIYA YAMASA Guillotine Cutter FUJI FW-3400 Flowpack Wrapper ANRITSU KW633B Checkweigher, SAFELINE Metal Detector, with conveyor. (2) RAMSEY CDT-B1200 In-Foil Metal Detector, each with conveyor. SASIB/CLYBOURN Automatic End Load Horizontal Cartoner, type ATP IOPAK Carton Taper, side drive fitted with (1) DOMINO Macrojet C7 Printers. LINX Series 6000 Ink Jet Coder. All available Interconnecting Conveyors
4561 - CANDY EXTRUDER Manufactured by WERNER LAHARA model 10-79. 800mm wide. No more than 6000 working hours. With guillotine cutter fitted to back of machine. Jacketed rollers. With dies supplied to form ribbons of the mass. Used for candy
4529 - CO-EXTRUDER - ONE-SHOT DEPOSITOR with 2 x heads and 2 x hoppers to allow making double deposits on belt Manufactured by KNOBEL Model CCE 620X Boxer never used in production just for tests & sample runs. Hydraulic powered and computer controlled Servo, Movement X-axis: 300 mm, Movement Z-axis: 150 mm. Working width is 620 mm, both Z and X movements Capacity max 50 strokes per minute (depend on product) . Machine is equipped with wire cutting and rotating nozzles to vary your product.
4160 - EXTRUDER - Cutter - Ball Former for confectionery HUTT extruder model RST Capacity around 60 to 70kg of balls per hour depending on size etc Extruder suitable for two different masses into a single rope. Then through a guillotine which can cut straight across or an adjustable angle. Through to a ball forming section.