| |
Item # 5711 – ONE SHOT DEPOSITOR
Manufactured by KNOBEL
Model KCM Omega One Shot Depositor
year 2008
never used, in excellent condition. |  | Item # 5707 – WIRE CUT COOKIE DEPOSITOR
Manufactured by MAGNA MIXER CO (USA)
17inch wide version
This Cookie Depositor can produce around 1,250 dozen wire-cut uniform cookies per hour, depending on choice of die
The 17in. model is adjustable for 16in. to 19in. wide pans
The speed of the entire machine (feed, stroke & conveyor) is controlled by the "Speed Adjust Handwheel" and the "Feed Adjusting Screw", which will allow up to 70 stokes per minute. |  | Item # 5688 – DEPOSITOR
Manufactured by HOPPE
Depositing Machine, Type 0340,
300mms wide belt,
8-nozzles across. |  | Item # 5659 - CHOCOLATE DEPOSITOR
Manufactured by LOW AND DUFF MACINTYRE
Year 2006,
Compact pneumatic depositor mounted on conveyor chain drive system
Fitted with mould stacker unit, Mould heater unit; depositor station, Two vibratory units
Up to 20 moulds per minute, Mould size 425mm x 205mm
Stainless steel construction
with LOW & DUFF Ribbon Blender and Screw Feeder for inclusions (e.g. whole almonds) (unused) |  | Item # 5499 – DEPOSITOR
Manufactured by MONO
Model Omega Touch Depositor,
built in year 2009, ex. demonstration machine with only several weeks worth of working hours.
Features ∙ Large colour touch screen control panel ∙ Stainless steel ∙ 770 programs ∙ On screen language selection ∙ Easy to clean ∙ Easy to program with on screen graphic interface ∙ Sturdy construction ∙ Extended capacity hopper options • Power: 2.5 kW; single-phase; 13А maximum load. • High depositing speed • Forth and back tray movement • Moving hopper – up/down • Rotating templates clockwise and anticlockwise Accurate and consistent production of multilayer deposits.
Up to 25% faster than any comparable depositor on the market with 35 cycles a minute.
Weight - 204 kg
Height – 1541 mm ;
Width – 871 mm ;
Length – 1200 mm
Hopper capacity – 20 l
400mms wide, extension of the hard dough hopper from 20 to 36litres.
Several different sets of nozzles included for various different product. |  | Item # 5149 – STARCHLESS MOULDING LINE FOR JELLY CANDY
Manufactured by EVRESI CONSTRUCTIONS (Greece)
Fully Automatic Starchless Line for the production of jellies.
type GELLO-100
Rated at around 250kg to 350kg per hour,
up to 35 moulds per minute,
silicone mould size 405mm x 70mm x 20mm high (2 x 24 holes)
7-9g product per hole standard but also fitted with system to go as low as 3-4g per hole
168 to 216g per mould
the line was producing a round shape of 24mms diameter x 13mms high.
STARCHLESS JELLY LINE CONSISTED OF:
stainless steel steam heated boiler 250Kg with a motor drive 1,5 Hp
syrup feed pump in order to transfer the syrup to the heated tank.
stainless steel heated tank up to 50Kg for premix (citric acid, colour, flavour) in combination with a motor drive stirring for 2-3 minutes
stainless steel heated tank up to 50Kg for feed with syrup over and over again before becomes empty over the pistons.
Cooling tunnel & cooling system 3 Hp
Turbomixer up to 50Kg with a motor drive 1Hp which is premix & stirring (pectin, sugar and water)
Including ROSE FORGROVE DOUBLE TWIST WRAPPER
Touch screen plc control (English & Greek)
Manual adjustable gearing for increasing & decreasing the jelly weight
380v, 50hz
(not including robotic unloader or coating drum shown in videos)click for videos |     | 4955 - CHOCOLATE DEPOSITOR
Manufactured by SOLLICH
Model KG620-Duplex
currently set up with 26-pistons
mould sizes 600 x 285 x 25mms.
The machine is used for the automatic filling of moulds to produce solid products, up to a weight of 50grammes,
and suitable for mould widths from 300 to 800mms wide.
The machine consists of Mould Feeder, Mould Transport, Accurate Metering Piston Depositor, Inline Shaker, Automatic Mould Transfer.
Rated output on this machine is between 200 & 1000Kgs per hour. |  |
|
